SHAW SADP device

is a portable dew point measuring device used to measure trace moisture in gases and ambient air. This device is specifically designed for hazardous environments and has ATEX and IECEx approvals that demonstrate its inherent safety. ### Features and Benefits - **High accuracy**: The SHAW SADP device has an accuracy between ±3 and ±4 °C dew point. - **Intrinsic Safety**: It has ATEX and IECEx approvals for use in hazardous environments. - **Portable and self-sufficient**: This device is fully portable and works with "C" type batteries and does not require an external power source. - **Automatic Calibration**: It has an automatic calibration feature that increases accuracy and ease of use. - **Continuous operation**: It can work continuously for more than 150 hours. - **Drying chamber**: Using drying technology, the sensor is always kept dry and ready for quick measurement. ### How to use 1. **Putting in READ mode**: First, put the device in READ mode and connect the gas or air source. 2. **Blocking the outlet**: Block the outlet with your finger so that the device head rises under pressure. Then remove your finger to get a stable reading. 3. **Shutdown**: If you don't need continuous reading, lower the head of the device and turn off the device. ### Automatic calibration 1. **Preparation**: Using the small screwdriver provided, disconnect the air or gas tubes and put the device in READ mode. 2. **Raise and lower the head of the device**: Raise and lower the head of the device three times and then keep it in the up position for one minute. 3. **fine adjustment**: If you need fine adjustment, turn the small screw on the device to reach the auto calibration line. ### Applications This device is used in various industries such as electricity production, semiconductor production and pharmaceuticals to measure the humidity of footprints.