موتور الکتریکی مدل HWDE 1481
The desired electric motor with the following specifications is as follows:
1. Model: HWDE 1481
2. Type: DU 50/4-50 SX
3. Serial number: 2506
4. Code: K200-600-649
5. Product code: 0103-0023
6. Frequency: 50 Hz
7. Phase: 3 phases
8. Voltage: 400 volts
9. Speed: 1350 rpm (г/min 1350)
10. Degree of protection: IP 00
11. Insulation class: Class F
Description of engine components:
1. Engine model and type: HWDE 1481 model and DU 50/4-50 SX type indicate a specific series and type of engine that may be designed for specific industrial applications.
2. Serial number and product code: These values are used to accurately identify the engine and follow up in case of need for after sales service.
3. Frequency and phase: The frequency of 50 Hz and 3 phases of the motor indicate compatibility with industrial electricity standards in many countries.
4. Working voltage: 400V, which is usually used for industrial applications.
5. Engine speed: 1350 rpm, which is a relatively low speed for an industrial engine.
6. Degree of protection: IP 00, which means no protection against dust and water. This shows that the engine should be used in clean and dry environments.
7. Insulation class: Class F, which indicates the high temperature resistance of the motor insulation.
🔷 Applications and features of the engine:
This motor can be used in various industrial environments that require electric motors with relatively low speed and medium power. 400V three-phase motors are commonly used in large industrial equipment, machinery, and pumping systems.
Important note: Due to the low degree of protection (IP 00), it is not recommended to use this motor in humid or dusty environments. Also, the F insulation class allows the motor to withstand higher temperatures, which can be useful in hot industrial environments.
🔷 maintenance and care:
To maintain optimal engine performance, regular and periodic maintenance is essential. This includes checking coils, bearings and other mechanical parts to ensure there is no wear and tear. Also, to avoid thermal damage, proper cooling systems should be used.