⸻

1. The original profile

• Nutrition voltage: 24V Direct (24VDC)

• Motor type: DC without brushless dc

• Gearbox ratio: 12: 1

• Linear speed domain: from about 0.07 to 1.31 m/s

• Tube diameter: 50mm standard (suitable for industrial frames)

• Weight approxus: about 1.8 to 2 kg

• Technical Number: 59334303/0004

• Producer: Merror

• Application category: Transfer, packaging, assembly and logistics lines

⸻

1. Structure and design

In EC310, the engine and gearbox are located inside the roller axis. This compact and intelligent design makes:

• Do not occupy space under conveyance,

• Need to remove side motors,

• Make easier installation and easier maintenance.

Tube is usually a steel with galvanized or stainless steel to durable in humid and industrial environments.

⸻

1. Performance and efficiency

This engine has high efficiency due to the design of the brushing (more than 1 % in the nominal load).

its output torque is ideal for transferring boxes, medium packages and industrial parts.

Despite the gear ratio of 1: 1, the conveyor speed is soft and quiet, and if you use the PWM controller, acceleration and brake can also be controlled.

⸻

1. Key advantages and features

1. No need to maintain:

Due to the elimination of charcoal and integrated design, it has a long life and requires a minimal service.

2. High Electrical Safety:

Working with a 2V DC voltage reduces the risk of electricity and the ability to use in human lines.

is suitable for clean and controlled work environments (food, pharmaceutical, electronics).

4. The speed control and direction:

Ability to control by PLC or EC controller via PWM, variable voltage or communication protocols.

5. Easy installation in the standard conveyor frame:

without the need for major changes in the structure.

⸻

1. Suggested applications

• Packaging lines in the food and pharmaceutical industry

• Logistics conveyors in warehouses and postal centers

• Automatic assembly lines (Automation Line)

• Sorting Line Systems

• Conveyors in Pick & Place or Buffer Zone Systems

⸻

1. Technical tips for installation and operation

• The power supply must be 2V stabilized with sufficient current capacity (about 1 amp per engine).

• Use short cabbage with appropriate cross -section to minimize voltage drop.

• When installing, make sure the roller is complete with the conveyor frame.

• If you use a few roller in one line, feeding should be divided and protected by fuse.

• Use a protective cover in wet or dusty environments.

⸻

1. Maintenance and common errors

• Reduce speed: probability of excessive voltage drop or load.

• Disconnect: Checking the connections or internal circuit (control board).

• Abnormal sound: need to check the bearings or roller alignment.

• High heat: Inadequate ventilation or inappropriate load with motor power.

⸻

1. Strengths and restrictions

strengths:

• Very durability and longevity

• Sustainable and precise performance

• Low energy consumption

• Intensive and delicate design

• Suitable for continuous work (Duty Cycle above)

Restrictions:

• Price higher than brush models

• Requires a clean and precise DC power supply

• In case of failure, specialized repair requires